EMC testing for telecom, medical, automotive, railway and defence products.
Conducted and radiated emissions, ESD, surge, burst, RF immunity and more, to CISPR, IEC 61000, IEC 60601-1-2, AIS-004, EN 50121 for RDSO and MIL-STD-461G. We plan the test levels and set-up, book accredited chambers and help you through any failures.
Emissions, immunity and the approvals that need them
Emissions (EMI)
Conducted and radiated emission measurements in shielded rooms and chambers to CISPR, EN and MIL-STD-461 limits.
Immunity (EMS)
ESD, radiated and conducted RF, burst, surge, magnetic fields and voltage dips to the IEC 61000-4 series.
Sector Standards
Telecom (TEC), medical (IEC 60601-1-2), automotive (AIS-004, CISPR 25), railway (EN 50121) and defence (MIL-STD-461G).
EMC testing: the key facts
| What we do | Arrange EMC pre-compliance and compliance testing at accredited partner labs |
| Lab accreditation | NABL (ISO/IEC 17025), ILAC MRA recognised; TEC-designated labs for MTCTE |
| Key standards | CISPR 11, 14, 15, 25, 32, 35; IEC 61000-3 and 61000-4 series; IEC 60601-1-2; AIS-004; EN 50121; MIL-STD-461G |
| Reports used for | TEC MTCTE, CDSCO medical devices, CMVR vehicle type approval, RDSO, defence tenders, CE and FCC export |
| Consultant | Bizpro Compliance Services, New Delhi, arranges EMC testing at NABL-accredited and ILAC-recognised labs across India for manufacturers, importers, exporters and government suppliers: +91 920 500 6364, contact@bizprocompliance.com |
EMC tests and standards we arrange
Emission and immunity tests for commercial, telecom, medical, automotive, railway and defence products. Search by test or product.
Showing all 18 tests and standards
| No. | Test | Standard | Used For | |
|---|---|---|---|---|
| 1 | Radiated & Conducted Emissions (IT / AV)Emission limits for multimedia, IT and AV equipment | CISPR 32 / EN 55032 | TECCEFCC | |
| 2 | Immunity (IT / AV)Immunity of multimedia and IT equipment | CISPR 35 / EN 55035 | TECCE | |
| 3 | ESDElectrostatic discharge immunity | IEC 61000-4-2 | TECCETender | |
| 4 | Radiated RF ImmunityImmunity to radiated radio-frequency fields | IEC 61000-4-3 | TECCETender | |
| 5 | EFT / BurstElectrical fast transient immunity | IEC 61000-4-4 | TECCETender | |
| 6 | SurgeLightning and switching surge immunity | IEC 61000-4-5 | TECCETender | |
| 7 | Conducted RF ImmunityImmunity to conducted disturbances from RF fields | IEC 61000-4-6 | TECCE | |
| 8 | Power Frequency Magnetic FieldImmunity to power frequency magnetic fields | IEC 61000-4-8 | TenderCE | |
| 9 | Voltage Dips & InterruptionsImmunity to dips, short interruptions and variations | IEC 61000-4-11 | CETender | |
| 10 | Harmonics & FlickerHarmonic current emissions and voltage fluctuations | IEC 61000-3-2 / 61000-3-3 | CE | |
| 11 | Household Appliances & Tools EMCEmission and immunity of appliances and power tools | CISPR 14-1 / 14-2 | CEExport | |
| 12 | Lighting Equipment EMCEmissions and immunity of lamps, luminaires and LED drivers | CISPR 15 / IEC 61547 | CETender | |
| 13 | Industrial, Scientific & Medical (ISM)Emissions of ISM equipment | CISPR 11 | CEExport | |
| 14 | Medical Electrical Equipment EMCEMC of medical devices and systems | IEC 60601-1-2 | CDSCOCE | |
| 15 | Automotive EMCVehicle and component EMC, incl. India's AIS standard for type approval | AIS-004 / CISPR 25 / ISO 11452 | CMVRExport | |
| 16 | Railway EMCEMC of rolling stock and trackside equipment for railway projects | EN 50121 series (via RDSO specs) | RDSOTender | |
| 17 | Military EMCConducted and radiated emission and susceptibility for defence equipment | MIL-STD-461G (CE102, RE102, CS114, RS103 etc.) | DefenceTender | |
| 18 | Telecom Equipment EMCEMC parameters within TEC Essential Requirements for MTCTE | TEC ER / CISPR 32 / IEC 61000 | TEC |
“” isn’t in this list
We arrange many more tests than are listed here. Tell us the product and the standard or specification, and we’ll confirm the lab and cost.
Tell us what the product is and we’ll confirm which approvals it needs, free.
Standards are listed by their current published reference; the exact edition is confirmed against your specification or the authority’s requirement before testing. Tests run at NABL-accredited and ILAC-recognised partner labs whose scope covers them.
Get your emc testing quote and timeline
Tell us the product and the standard, specification or approval you’re testing for. A specialist confirms the test plan, lab, total cost and turnaround, in writing.
- Reply within one business dayFrom a named consultant, not an automated sales sequence.
- Fixed written quoteGovernment fees, lab charges and our fee listed separately before you commit.
- Accredited labs across IndiaNABL / ILAC reports accepted by regulators and buyers.
What emc testing costs
One written quote covering every test, so there are no surprises when the report is issued.
Request received
Thanks. A BIS specialist will reply within one business day with your standard, test plan, cost and timeline.
Send it with one tap instead
The form couldn’t send just now. Your details are ready in a message, so you only need to press send.
RDSO and MIL-STD-461 EMC
Two of the most demanding EMC programmes in India.
Railway EMC for RDSO vendors EN 50121 via RDSO spec
Rolling stock, signalling and trackside electronics are tested to the parts of EN 50121 called up in the RDSO specification, at RDSO, government or NABL-accredited labs in RDSO’s order of preference.
MIL-STD-461G for defence CE / CS / RE / RS
We map your platform (ground, ship, aircraft) to the applicable CE, CS, RE and RS requirements, arrange testing at labs with MIL-STD-461 scope, and combine it with MIL-STD-810H environmental testing where the spec asks.
Your EMC testing in five steps
Chamber time is expensive, so we confirm the test levels, operating modes and monitoring set-up before booking.
Standard & Test Plan
We confirm exactly which standard, clauses and tests apply, and why: certification, tender, export or customer approval.
Day 1Lab & Fixed Quote
We choose a lab whose accreditation scope covers your tests and send one written quote with cost and turnaround.
Day 1–3Samples & Documents
You send samples, datasheets and any drawings or specs. We check quantities so testing isn’t held up.
Day 3–7Testing & Updates
The lab tests to the plan. Early failures are flagged straight away so you can fix and retest quickly. Witnessing on request.
As quotedReport Review
We check the report against the standard and the authority it’s for before you submit it, then help with the next filing.
On completionWhy manufacturers use us for EMC testing
Right Lab, First Time
We match your tests to a lab whose accreditation scope actually covers them, so the report is accepted by BIS, TEC, CDSCO, RDSO, a buyer or a tender committee.
One Point of Contact
Test plan, quotes, samples, follow-ups and report review are handled by one specialist, not passed between lab departments.
Testing Linked to Certification
Reports are planned for the approval you need next, from BIS and TEC to CE and FCC, so you don’t pay to test twice.
EMC testing for businesses across India
We work with accredited EMC labs in Bengaluru, Delhi NCR, Chennai, Pune, Hyderabad, Mumbai and other centres, and arrange testing for clients anywhere, including:
Common EMC testing mistakes
Skipping Pre-Compliance
A quick pre-scan finds most emission problems before you pay for full chamber time.
Undefined Pass Criteria
Immunity results need performance criteria agreed in advance, or the lab can’t call a pass.
Wrong Configuration
Cables, peripherals and operating mode must match real use and the standard’s set-up.
Missing Support Equipment
Labs need loads, simulators and monitoring software to run and watch the product.
Other testing we arrange
Electrical Testing
Safety, performance, temperature rise, IP and type tests for electrical products. See Electrical Testing.
Chemical Testing
RoHS, REACH, heavy metals, composition, water and material analysis. See Chemical Testing.
Medical Device Testing
IEC 60601, ISO 10993 biocompatibility, sterility and performance for CDSCO. See Medical Device Testing.
ASTM Testing
Mechanical, material, coating, packaging and petroleum tests to ASTM methods. See ASTM Testing.
NABL / ILAC Accredited Testing
Accredited reports accepted by Indian regulators and overseas buyers. See NABL / ILAC Accredited Testing.
Client Specification Testing
Testing to your tender, OEM, RDSO or MIL-STD-810 specification. See Client Specification Testing.
Common questions about emc testing
What is EMC testing?
Is EMC testing mandatory in India?
What is the difference between EMI and EMS?
What is MIL-STD-461 testing?
What is railway EMC testing?
How long does EMC testing take?
What if my product fails EMC?
Get your emc testing planned properly
Tell us the product and the standard or approval it’s for. We’ll confirm the tests, lab, total cost and turnaround in writing, free.